Yes the Curt hitch part # C12130 is a confirmed fit for your 2008 Mercury Marquis. Then for trailer wiring the Curt harness part # C59236 would be a great option. It's a universal style harness that will require hardwiring to the taillight wiring. view full answer...
You will indeed need a 4-flat with a converter for your 1999 Mercury Grand Marquis, with the correct part being the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector # C59236.
Then if you also need a hitch, the correct fit is the Trailer Hitch Receiver # e66AR. view full answer...
I have checked the instructions for that particular hitch. You can see them for yourself by clicking the provided link.
The Draw-Tite Class III Receiver, part # 41116 will require no modifications to the rear fascia. The photo shown on the product page is an actual photo, not a stock photo. view full answer...
Yes, the etrailer Trailer Hitch Receiver item # e66AR comes with all the necessary hardware to install this hitch to your 2000 Mercury Grand Marquis.
If you need a wiring harness to control your trailer's lights you will want the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector # C59236.
To round out your towing setup I recommend the Curt Towing Starter Kit for 2" Hitches item # C45534. This towing kit will provide you with a 2" ball and a fixed ball mount with a... view full answer...
If you are referring to the Glacier Rubber Adjusters part # PW99 and you have the typical wheel size of P225/60/R16, then these rubber adjusters will not work for you as they are designed to fit wheels 16-1/2"-19" in diameter and will be too big. Instead, I recommend using the Glacier Multi-Arm Rubber Adjusters part # PW105 as these are designed to fit wheels 15-18" in diameter which will be a better fit for you. They will not be too small for the factory tire size. The rubber adjusters... view full answer...
The Prostrobe Rocky 8 Pro White Windshield Light # PRS70747 is not waterproof since it is intended to mount to the inside surface of a vehicle windshield using the included suction cup mounts. It is more than bright enough to shine through a windshield. It is so bright that the packaging includes a warning not to look directly at the light!
The standard cigarette lighter style plug (with 10-foot cord) fits into the power receptacle inside most vehicles.
The Rocky 8 uses LED technology... view full answer...
When you measure for a ballmount, you will want to measure from the ground up to the flat bottom part of your coupler, not inside of it. The 2-3/4 inch rise provided by the recommended ball mount would work just fine for you. That part number has been discontinued, but # EBMK4 will be a fit. view full answer...
If the tow dolly and vehicle weighs less than 4,000 lbs the Curt hitch part # 13707 would be fine to tow a vehicle in the way you described as thats it's towing capacity. view full answer...
We do have LED lights that fit in place of a 906 bulb like you mentioned. For that we have the part # DI64ZR for a cool white color or the part # DI74ZR for a warmer white. view full answer...
I do have a hitch cover and anti-rattle sleeve option for you, however, the Draw-Tite QSP Trailer Hitch Silencer and Cover part # 63080 will not fit a 2" Curt trailer hitch receiver as the collar on the outside of the hitch receiver is too large.
In order to cover the receiver opening on a 2" Curt trailer hitch receiver like part # 13707 I recommend using the Curt Rubber Tube Cover part # C22272. For anti-rattle purposes I recommend using the Brophy Stabilizer Bracket for 2" Hitch Receiver... view full answer...
Backup camera systems are not vehicle-specific so the Rear View Safety Backup Camera System # RVS-5350 is a perfectly good option for your customer's 2008 Mercury Grand Marquis. Review and installation videos for this item are linked for you. This is a hardwired installation. view full answer...
Safety chains/cables shouldn't actually be attached to the tow bar # C19745 at all. The point is to have an alternative point of security in the event that any connection point of the tow bar fails and you have a loose vehicle on the road.
The Curt Tow Bar with Adjustable-Width Arms # C19745 is a very old-school design that was originally used with metal bumpers and people would just wrap the chains around the bumper and loop it up to the tow vehicle. I recommend finding a point on the... view full answer...
Yes, the Thule OutWay 2 Bike Carrier, part # TH45JV, will fit your 2002 Mercury Grand Marquis. It can carry 2 bikes with a maximum weight capacity of 66 lbs. Thule does not recommend the use of a 3 bike carrier on your vehicle.
If you are going to be carrying women's, childre's, or alternative frame bikes that do not have the horizontal bar at the top of the frame, you will want to use the Thule Bike Adapter Bar, part # TH982XT. It attaches to the center seat post and to the handlebar... view full answer...
Go To Results